Overview

The status of an ESF Gateway may be viewed from the Status window, which is accessed by selecting the Status option located in the System area. The Status window provides a summary of the key information regarding the status of the gateway including its IoT Cloud connection and network configuration.

Cloud and Data Service

This section provides a summary of the IoT Cloud connection status including the following details:

  • Connection Status - provides the status of the DataService and DataTransport connection. Valid values are CONNECTED or DISCONNECTED.

  • Auto-connect - specifies whether the DataService automatically connects to the remote IoT Cloud Service on startup and disconnect.

  • Broker URL - defines the URL of the MQTT broker.

  • Account - defines the name of the account used by the MqttDataTransport service when an MQTT connection is opened.

  • Username - supplies the name of the user used by the MqttDataTransport service when an MQTT connection is opened.

  • Client ID - specifies the client identifier used by the MqttDataTransport service when an MQTT connection is opened.

Ethernet Settings

This section provides the Ethernet interface configurations as summarized below.

eth0                                  172.16.0.1
                                            Subnet Mask: 255.255.255.0
                                            Mode: LAN
                                            IP Acquisition: Manual
                                            Router Mode: DHCP & NAT
eth1                                  10.11.5.2
                                            Subnet Mask: 255.255.255.0
                                            Mode: WAN
                                            IP Acquisition: DHCP
                                            Router Mode: NAT

Wireless Settings

This section provides the Wi-Fi interface configuration as summarized below.

wlan0                                 172.16.1.1
                                            Subnet Mask: 255.255.255.0
                                            Mode: LAN
                                            IP Acquisition: Manual
                                            Router Mode: DHCPD & NAT
                                            Wireless Mode: Access Point
                                            SSID: kur_gateway_00:E0:C7:09:35:D8

Cellular Settings

This section provides the cellular interface configuration as summarized below.

ppp0                                  10.110.192.50
                                            Subnet Mask: 255.255.255.255
                                            Mode: WAN
                                            IP Acquisition: DHCP
                                            APN: c1.korem2m.com
                                            PPP: 0

Position Status

This section provides the GPS status and latest known position (if applicable) including the following details:

  • Longitude - longitude as reported by the PositionService in radians.

  • Latitude - latitude as reported by the PositionService in radians.

  • Altitude - altitude as reported by the PositionService in meters.